ReelUp tracking pixel Read the Privacy Policy
Free nationwide delivery on orders over R1,500
Expert support Local SA warranty Secure payments
South Africa (ZAR R)
0
Menu Close
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg – product detail 2
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg – product detail 3
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg – product detail 4
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg – product detail 2
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg – product detail 3
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg – product detail 4
Sold out

SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg

SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg

Vendor: SA Filament

Type: 3D Printing Filament

R 349.99
R 349.99

Subject to approval and Mobicred terms and conditions.

Colour: Silver
  • Silk Chrome Finish – Glossy metallic surface without post-processing
  • Easy To Print PLA+ – Reliable extrusion and low warping
  • Improved Strength – Tougher than standard PLA
  • Precision Diameter – ±0.05mm tolerance for accurate parts
  • Universal Compatibility – Works on most 1.75mm FDM printers
  • Free Shipping over R1500
  • 7-Day Returns
  • SA Delivery 2-7 days
SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg

SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg

R 349.99
R 349.99

Overview

SA Filament Silk PLA Plus Chrome 1.75mm is a premium enhanced PLA material engineered for smooth printing and visually striking results. It combines the reliability of traditional PLA with improved strength and a unique silk metallic surface finish that reduces visible layer lines.

The filament prints consistently across a wide range of printers and produces clean parts without requiring advanced tuning. Its low shrinkage behaviour helps prevent warping, making it suitable for both functional parts and display models.

Manufactured to strict diameter tolerances, SA Filament PLA Plus Chrome delivers predictable extrusion, dependable adhesion and repeatable print quality for hobbyists, makers and professional users.

Key Features
  • Silk metallic finish straight off the printer
  • Improved toughness compared to standard PLA
  • Low warping and easy bed adhesion
  • Minimal stringing and clean bridging
  • Consistent extrusion and feeding
  • Compatible with Bowden and direct drive extruders
  • Vacuum sealed for moisture protection

MATERIAL INTELLIGENCE

PLA performance guide

A practical guide for comparing this material class. Product-specific manufacturer data always takes priority.

Filament Compare all materials
Typical service heat
45–55°C
Typical sustained-service range; softening can begin above this range.
Impact resistance
Low–medium
How well a cured or printed part handles knocks and drops.
Brittleness
Medium
Lower means the part is more likely to flex before it cracks.
Fine detail
Excellent
Relative ability to hold small features and sharp edges.

Material behaviour

Stiffness
High
UV / weather
Limited
Moisture sensitivity
Moderate
Skill level
Easy

Print setup

Nozzle
190–220°C
Heated bed
0–60°C
Enclosure
Not required
Prep / hardware
Helpful if stringing or brittle · Standard brass nozzle

Good choice for

Detailed models, visual prototypes, fixtures and indoor parts

Think twice for

Hot cars, high-heat enclosures and impact-heavy parts

Important: Heat figures are typical material-class guidance, not a guaranteed safe operating limit. Geometry, load, print orientation, colour, moisture, annealing and post-cure can change performance. For hot, structural or safety-critical parts, use the exact manufacturer TDS/HDT value.

Product information & local support

About the SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg

Compare the product, confirm compatibility and buy with nationwide delivery and South African support from Create It 3D.

SA Filament PLA Plus Chrome FilamentsElevate your 3D printing projects with SA Filament PLA Plus Chrome Filament 1kg. This premium PLA filament offers a smooth, glossy chrome finish that gives your...

SA Filament Silk PLA+ Chrome Filament 1.75mm 1kg is listed in our 3D Printing Filament range. Check the selected variant, working dimensions, materials, electrical requirements and machine compatibility before ordering. If the product is an accessory or replacement part, match the exact printer or machine model rather than relying on appearance alone.

BrandSA Filament
Product category3D Printing Filament
AvailabilityCurrently unavailable
DeliveryNationwide across South Africa
Live Google rating Loading live review count ★★★★★ Independent SA reviews Live HelloPeter profile Ratings, reviews and our response record
Pay over time Interest-free instalments
Mobicred Flexible credit Monthly instalment options
Nationwide delivery Across South Africa
Local expert support Before and after you buy

Independent customer feedback

Real projects. Real support. Real reviews.

See what South African customers say about working with Create It 3D.

PUBLIC CUSTOMER FEEDBACK Recent reviews on Google
5.0 ★★★★★ Recent featured reviews
Read all Google reviews
Lluwellyne Germishuizen Customer review Google
★★★★★
“Great service, the only place in SA that was able to help me in two days.”
Public Google review
Sheldon Customer review Google
★★★★★
“They know what they are doing!”
Public Google review
Christiaan du Toit Customer review Google
★★★★★
“It was a pleasure dealing with Brenton. The parts he produced are on point.”
Public Google review

Reviews are shown as written by customers, with light punctuation edits for readability. View the public source.

Upload project files CAD, 3D, documents, media & archives · up to 5 GB each