ReelUp tracking pixel Read the Privacy Policy
Free nationwide delivery on orders over R1,500
Expert support Local SA warranty Secure payments
South Africa (ZAR R)
0
Menu Close
Silk PLA Plus Filament 1kg - Steel Blue
Royal Blue
Filament 1kg - Yellow
Filament 1kg - Orange
Filament 1kg - Brown
SA Filament Silk PLA Plus Filament 1kg – product detail 6
SA Filament Silk PLA Plus Filament 1kg – product detail 7
SA Filament Silk PLA Plus Filament 1kg – product detail 8
Silk PLA Plus Filament 1kg - Steel Blue
Royal Blue
Filament 1kg - Yellow
Filament 1kg - Orange
Filament 1kg - Brown
SA Filament Silk PLA Plus Filament 1kg – product detail 6
SA Filament Silk PLA Plus Filament 1kg – product detail 7
SA Filament Silk PLA Plus Filament 1kg – product detail 8

SA Filament Silk PLA Plus Filament 1kg

SA Filament Silk PLA Plus Filament 1kg

Vendor: SA Filament

Type: 3D Printing Filament

R 349.99
R 349.99

Subject to approval and Mobicred terms and conditions.

Color: Sky Blue
  • Ultra Gloss Surface – Mirror-like finish
  • Stronger Than PLA – Improved toughness
  • Normal PLA Settings – No special tuning
  • Low Warping – Easy bed adhesion
  • Perfect For Display – Premium visual prints
  • Free Shipping over R1500
  • 7-Day Returns
  • SA Delivery 2-7 days
Silk PLA Plus Filament 1kg - Steel Blue

SA Filament Silk PLA Plus Filament 1kg

R 349.99
R 349.99

Overview

SA Filament Silk PLA Plus is an upgraded aesthetic PLA engineered to produce smooth reflective prints while maintaining easy printability. It offers the visual appeal of silk filaments combined with the reliability of standard PLA materials.

Traditional silk filaments often suffer from weak layer bonding and slow print speeds. This formulation is optimised to print at normal PLA temperatures and speeds while maintaining consistent strength and clean surface quality.

The material is ideal for makers, businesses and designers who want visually impressive results without complicated setup or tuning.

Key Features
  • High gloss reflective finish
  • Improved durability vs standard PLA
  • Standard PLA temperature compatibility
  • Reliable layer bonding
  • Low shrinkage and warping
  • Consistent extrusion flow
  • Vacuum sealed packaging

MATERIAL INTELLIGENCE

PLA performance guide

A practical guide for comparing this material class. Product-specific manufacturer data always takes priority.

Filament Compare all materials
Typical service heat
45–55°C
Typical sustained-service range; softening can begin above this range.
Impact resistance
Low–medium
How well a cured or printed part handles knocks and drops.
Brittleness
Medium
Lower means the part is more likely to flex before it cracks.
Fine detail
Excellent
Relative ability to hold small features and sharp edges.

Material behaviour

Stiffness
High
UV / weather
Limited
Moisture sensitivity
Moderate
Skill level
Easy

Print setup

Nozzle
190–220°C
Heated bed
0–60°C
Enclosure
Not required
Prep / hardware
Helpful if stringing or brittle · Standard brass nozzle

Good choice for

Detailed models, visual prototypes, fixtures and indoor parts

Think twice for

Hot cars, high-heat enclosures and impact-heavy parts

Important: Heat figures are typical material-class guidance, not a guaranteed safe operating limit. Geometry, load, print orientation, colour, moisture, annealing and post-cure can change performance. For hot, structural or safety-critical parts, use the exact manufacturer TDS/HDT value.

Product information & local support

About the SA Filament Silk PLA Plus Filament 1kg

Compare the product, confirm compatibility and buy with nationwide delivery and South African support from Create It 3D.

SA Filament Silk PLA Plus Filament 1kg – High-Quality, Silky 3D Printing FilamentLooking to create smooth, shiny, and professional-looking 3D prints? The SA Filament Silk PLA Plus Filament 1kg is the...

SA Filament Silk PLA Plus Filament 1kg is listed in our 3D Printing Filament range. Check the selected variant, working dimensions, materials, electrical requirements and machine compatibility before ordering. If the product is an accessory or replacement part, match the exact printer or machine model rather than relying on appearance alone.

BrandSA Filament
Product category3D Printing Filament
AvailabilityAvailable to order
DeliveryNationwide across South Africa
Live Google rating Loading live review count ★★★★★ Independent SA reviews Live HelloPeter profile Ratings, reviews and our response record
Pay over time Interest-free instalments
Mobicred Flexible credit Monthly instalment options
Nationwide delivery Across South Africa
Local expert support Before and after you buy

Independent customer feedback

Real projects. Real support. Real reviews.

See what South African customers say about working with Create It 3D.

PUBLIC CUSTOMER FEEDBACK Featured reviews on Google
5.0 ★★★★★ Selected for detail and relevance
Read all Google reviews
Lluwellyne Germishuizen Customer review G
★★★★★
“Great service, the only place in SA that was able to help me in two days.”
Public Google review
Blaise Ingele Customer review G
★★★★★
“I ordered 4 Creality 3D printers and filaments from CreateIT3D, and the experience was flawless!”
Public Google review
Altus Wiese Customer review G
★★★★★
“I really recommend Create It 3D. Went out of their way to source a part I needed to fix my 3D printer.”
Public Google review

Reviews are shown as written by customers, with light punctuation edits for readability. View the public source.